Счетчик

Поисковый анализ сайта
яндекс.ћетрика
Cервер и сайт запущен 2011.02.01 на Debian

Установка и настройка ispconfig - 3 debian 7

Начнем поднятие нашего хостинг сервера на debian 7

Все начинаем с установки сервера без десктопа, он нам не понадобиться.

Установим SSH сервер

apt-get install ssh openssh-server

Настроим нашу сетку

nano /etc/network/interfaces

# This file describes the network interfaces available on your system

# and how to activate them. For more information, see interfaces(5).

# The loopback network interface

auto lo

iface lo inet loopback

# The primary network interface

#allow-hotplug eth0

#iface eth0 inet dhcp

auto eth0

iface eth0 inet static

       address 192.168.0.100

       netmask 255.255.255.0

       network 192.168.0.0

       broadcast 192.168.0.255

       gateway 192.168.0.1

Перезапустим наш сетевой интерфейс

/etc/init.d/networking restart

Редактируем /etc/hosts. Make it look like this:

nano /etc/hosts

127.0.0.1       localhost.localdomain   localhost

192.168.0.100   server1.example.com     server1

# The following lines are desirable for IPv6 capable hosts

::1     localhost ip6-localhost ip6-loopback

ff02::1 ip6-allnodes

ff02::2 ip6-allrouters

echo server1.example.com > /etc/hostname

/etc/init.d/hostname.sh start

Запустим

hostname

hostname -f

Обновим нашу операционную систему и добавим в /etc/apt/sources.list несколько стандартных репозиторий

nano /etc/apt/sources.list

deb http://ftp.de.debian.org/debian/ wheezy main contrib non-free
deb-src http://ftp.de.debian.org/debian/ wheezy main contrib non-free
deb http://security.debian.org/ wheezy/updates main contrib non-free
deb-src http://security.debian.org/ wheezy/updates main contrib non-free
# wheezy-updates, prenanoously known as 'volatile'
deb http://ftp.de.debian.org/debian/ wheezy-updates main contrib non-free
deb-src http://ftp.de.debian.org/debian/ wheezy-updates main contrib non-free

Запустим

apt-get update

Применим обновление

apt-get upgrade

Изменим dash

выполним

dpkg-reconfigure dash

Use dash as the default system shell (/bin/sh)? <-- No

Установим сервер времени

apt-get install ntp ntpdate

Установим Postfix, Dovecot, MySQL, phpMyAdmin, rkhunter, binutils

apt-get install postfix postfix-mysql postfix-doc mysql-client mysql-server openssl getmail4 rkhunter binutils dovecot-imapd dovecot-pop3d dovecot-mysql dovecot-sieve sudo

В процессе установки будут несколько вопросов

General type of mail configuration: <-- Internet Site

System mail name: <-- server1.example.com

New password for the MySQL "root" user: <-- yourrootsqlpassword

Repeat password for the MySQL "root" user: <-- yourrootsqlpassword

Next open the TLS/SSL and submission ports in Postfix:

nano /etc/postfix/master.cf

Uncomment the submission and smtps sections as follows (leave -o milter_macro_daemon_name=ORIGINATING as we don't need it):[...]

submission inet n       -       -       -       -       smtpd

-o syslog_name=postfix/submission

-o smtpd_tls_security_level=encrypt

-o smtpd_sasl_auth_enable=yes

-o smtpd_client_restrictions=permit_sasl_authenticated,reject

# -o milter_macro_daemon_name=ORIGINATING

smtps     inet n       -       -       -       -       smtpd

-o syslog_name=postfix/smtps

-o smtpd_tls_wrappermode=yes

-o smtpd_sasl_auth_enable=yes

-o smtpd_client_restrictions=permit_sasl_authenticated,reject

# -o milter_macro_daemon_name=ORIGINATING

[...]

Перезапустим postfix:

/etc/init.d/postfix restart

Редактируемконфигфайл mysql /etc/mysql/my.cnf

Закоментируемстроку bind-address = 127.0.0.1:

nano /etc/mysql/my.cnf

[...]

# Instead of skip-networking the default is now to listen only on

# localhost which is more compatible and is not less secure.

#bind-address           = 127.0.0.1

[...]

перезапустим MySQL:

/etc/init.d/mysql restart

Проверим

netstat -tap | grep mysql

Выводследущий

root@server1:~# netstat -tap | grep mysql

tcp       0     0 *:mysql                 *:*                     LISTEN     26757/mysqld

Установим amavisd-new, SpamAssassin, and ClamAV, we run

apt-get install amavisd-new spamassassin clamav clamav-daemon zoo unzip bzip2 arj nomarch lzop cabextract apt-listchanges libnet-ldap-perl libauthen-sasl-perl clamav-docs daemon libio-string-perl libio-socket-ssl-perl libnet-ident-perl zip libnet-dns-perl

Для нормальной работы стопанем spamassassin и удалим с автозагрузки

/etc/init.d/spamassassin stop

update-rc.d -f spamassassin remove

Установим Apache2, PHP5, phpMyAdmin, FCGI, suExec, Pear, And mcrypt

apt-get install apache2 apache2.2-common apache2-doc apache2-mpm-prefork apache2-utils libexpat1 ssl-cert libapache2-mod-php5 php5 php5-common php5-gd php5-mysql php5-imap phpmyadmin php5-cli php5-cgi libapache2-mod-fcgid apache2-suexec php-pear php-auth php5-mcrypt mcrypt php5-imagick imagemagick libapache2-mod-suphp libruby libapache2-mod-ruby libapache2-mod-python php5-curl php5-intl php5-memcache php5-memcached php5-ming php5-ps php5-pspell php5-recode php5-snmp php5-sqlite php5-tidy php5-xmlrpc php5-xsl memcached

Будут некоторые вопросы:

Web server to reconfigure automatically: <-- apache2

Configure database for phpmyadmin with dbconfig-common? <-- No

Подключим Apache модули suexec, rewrite, ssl, actions, and include (dav, dav_fs, and auth_digest):

a2enmod suexec rewrite ssl actions include

a2enmod dav_fs dav auth_digest

Откроем /etc/apache2/mods-available/suphp.conf...

nano /etc/apache2/mods-available/suphp.conf

... and comment out the

<FilesMatch "\.ph(p3?|tml)$"> section and add the line

Закоментим 3 строки

   #<FilesMatch "\.ph(p3?|tml)$">

   #   SetHandler application/x-httpd-suphp

   #</FilesMatch>

       Идобавим

AddType application/x-httpd-suphp .php .php3 .php4 .php5 .phtml

suPHP_AddHandler application/x-httpd-suphp

   <Directory />

       suPHP_Engine on

   </Directory>

   # By default, disable suPHP for debian packaged web applications as files

   # are owned by root and cannot be executed by suPHP because of min_uid.

   <Directory /usr/share>

       suPHP_Engine off

   </Directory>

# # Use a specific php config file (a dir which contains a php.ini file)

#       suPHP_ConfigPath /etc/php5/cgi/suphp/

# # Tells mod_suphp NOT to handle requests with the type <mime-type>.

#       suPHP_RemoveHandler <mime-type>

</IfModule>

перезапустим Apache:

/etc/init.d/apache2 restart

Изменим /etc/mime.types: заментируем строку

nano /etc/mime.types

[...]

#application/x-ruby                             rb

[...]

перезапустим Apache:

/etc/init.d/apache2 restart

Установим Xcache

apt-get install php5-xcache

перезапустим Apache:

/etc/init.d/apache2 restart

Установим PHP-FPM

apt-get install libapache2-mod-fastcgi php5-fpm

Включим moduleи перезапустим Apache:

a2enmod actions fastcgi alias

/etc/init.d/apache2 restart

Установим Mailman

apt-get install mailman

Выберем язык, e.g.:

Languages to support: <-- en (English)

Missing site list <-- Ok

Запустим:

newlist mailman

root@server1:~# newlist mailman

Enter the email of the person running the list: <-- admin email address, e.g. Этот адрес электронной почты защищён от спам-ботов. У вас должен быть включен JavaScript для просмотра.

Initial mailman password: <-- admin password for the mailman list

To finish creating your mailing list, you must edit your /etc/aliases (or

equivalent) file by adding the following lines, and possibly running the

`newaliases' program:

## mailman mailing list

mailman:             "|/var/lib/mailman/mail/mailman post mailman"

mailman-admin:       "|/var/lib/mailman/mail/mailman admin mailman"

mailman-bounces:     "|/var/lib/mailman/mail/mailman bounces mailman"

mailman-confirm:     "|/var/lib/mailman/mail/mailman confirm mailman"

mailman-join:         "|/var/lib/mailman/mail/mailman join mailman"

mailman-leave:       "|/var/lib/mailman/mail/mailman leave mailman"

mailman-owner:       "|/var/lib/mailman/mail/mailman owner mailman"

mailman-request:     "|/var/lib/mailman/mail/mailman request mailman"

mailman-subscribe:   "|/var/lib/mailman/mail/mailman subscribe mailman"

mailman-unsubscribe: "|/var/lib/mailman/mail/mailman unsubscribe mailman"

Hit enter to notify mailman owner... <-- ENTER

root@server1:~#

Отредактирем /etc/aliases

nano /etc/aliases

... Добавим несколько строк:[...]

## mailman mailing list

mailman:             "|/var/lib/mailman/mail/mailman post mailman"

mailman-admin:       "|/var/lib/mailman/mail/mailman admin mailman"

mailman-bounces:     "|/var/lib/mailman/mail/mailman bounces mailman"

mailman-confirm:     "|/var/lib/mailman/mail/mailman confirm mailman"

mailman-join:         "|/var/lib/mailman/mail/mailman join mailman"

mailman-leave:       "|/var/lib/mailman/mail/mailman leave mailman"

mailman-owner:       "|/var/lib/mailman/mail/mailman owner mailman"

mailman-request:     "|/var/lib/mailman/mail/mailman request mailman"

mailman-subscribe:   "|/var/lib/mailman/mail/mailman subscribe mailman"

mailman-unsubscribe: "|/var/lib/mailman/mail/mailman unsubscribe mailman"

Запустим

newaliases

Перезапустим Postfix:

/etc/init.d/postfix restart

Добавим mailmanв конфиг Apache2:

ln -s /etc/mailman/apache.conf /etc/apache2/conf.d/mailman.conf

Для того чтобы попасть вмаилман перейдем по ссылке

http://<vhost>/cgi-bin/mailman/admin/<listname>, или

http://<vhost>/cgi-bin/mailman/listinfo/<listname>.

http://<vhost>/pipermail you Поиск архива

Рестартуем apache2:

/etc/init.d/apache2 restart

Перезапустим Mailman daemon:

/etc/init.d/mailman start

 

Установка PureFTPd и Quota

apt-get install pure-ftpd-common pure-ftpd-mysql quota quotatool

Отредактируем /etc/default/pure-ftpd-common...

nano /etc/default/pure-ftpd-common

[...]

VIRTUALCHROOT=true

[...]

Возможность шифрования трафика TLS

echo 1 > /etc/pure-ftpd/conf/TLS

Создадимсертификат SSL

mkdir -p /etc/ssl/private/

Сгенерируем SSL сертификат:

openssl req -x509 -nodes -days 7300 -newkey rsa:2048 -keyout /etc/ssl/private/pure-ftpd.pem -out /etc/ssl/private/pure-ftpd.pem

Country Name (2 letter code) [AU]: <-- Enter your Country Name (e.g., "DE").

State or Pronanonce Name (full name) [Some-State]: <-- Enter your State or Pronanonce Name.

Locality Name (eg, city) []: <-- Enter your City.

Organization Name (eg, company) [Internet Widgits Pty Ltd]: <-- Enter your Organization Name (e.g., the name of your company).

Organizational Unit Name (eg, section) []: <-- Enter your Organizational Unit Name (e.g. "IT Department").

Common Name (eg, YOUR name) []: <-- Enter the Fully Qualified Domain Name of the system (e.g. "server1.example.com").

Email Address []: <-- Enter your Email Address.

Изменим права доступа SSLcertificate:

chmod 600 /etc/ssl/private/pure-ftpd.pem

Перезапустим PureFTPd:

/etc/init.d/pure-ftpd-mysql restart

Редактирем /etc/fstab.

nano /etc/fstab

# /etc/fstab: static file system information.

/dev/mapper/server1-root /               ext4   errors=remount-ro,usrjquota=quota.user,grpjquota=quota.group,jqfmt=vfsv0 0      1

mount -o remount /

quotacheck -avugm

quotaon -avug

УстановимДНСсервер BIND DNS

apt-get install bind9 dnsutils

Установим Vlogger, Webalizer, And AWstats

apt-get install vlogger webalizer awstats geoip-database libclass-dbi-mysql-perl

Откроем на редактирование /etc/cron.d/awstats

nano /etc/cron.d/awstats

... Закоментируем строки:

#MAILTO=root

#*/10 * * * * www-data [ -x /usr/share/awstats/tools/update.sh ] && /usr/share/awstats/tools/update.sh

# Generate static reports:

#10 03 * * * www-data [ -x /usr/share/awstats/tools/buildstatic.sh ] && /usr/share/awstats/tools/buildstatic.sh

Установим Jailkit

apt-get install build-essential autoconf automake1.9 libtool flex bison debhelper binutils-gold

cd /tmp

wget http://olivier.sessink.nl/jailkit/jailkit-2.16.tar.gz

tar xvfz jailkit-2.16.tar.gz

cd jailkit-2.16

./debian/rules binary

Установим собранный Jailkit .debпакет:

cd ..

dpkg -i jailkit_2.16-1_*.deb

rm -rf jailkit-2.16*

Установим fail2ban

apt-get install fail2ban

Создадим файл /etc/fail2ban/jail.local: и внесем туда следующее

nano /etc/fail2ban/jail.local

[pureftpd]

enabled = true

port     = ftp

filter   = pureftpd

logpath = /var/log/syslog

maxretry = 3

[dovecot-pop3imap]

enabled = true

filter = dovecot-pop3imap

action = iptables-multiport[name=dovecot-pop3imap, port="pop3,pop3s,imap,imaps", protocol=tcp]

logpath = /var/log/mail.log

maxretry = 5

[sasl]

enabled = true

port     = smtp

filter   = sasl

logpath = /var/log/mail.log

maxretry = 3

Далее создадим файл:

nano /etc/fail2ban/filter.d/pureftpd.conf

[Definition]

failregex = .*pure-ftpd: \(.*@<HOST>;\) \[WARNING\] Authentication failed for user.*

ignoreregex =

nano /etc/fail2ban/filter.d/dovecot-pop3imap.conf

[Definition]

failregex = (?: pop3-login|imap-login): .*(?:Authentication failure|Aborted login \(auth failed|Aborted login \(tried to use disabled|Disconnected \(auth failed|Aborted login \(\d+ authentication attempts).*rip=(?P<host>\S*),.*

ignoreregex =

Перезапустим fail2ban:

/etc/init.d/fail2ban restart

Установим SquirrelMail

apt-get install squirrelmail

Переконфигурируем SquirrelMail:

squirrelmail-configure

Нам нужно указатьб что мы используем Dovecot-IMAP/-POP3:

SquirrelMail Configuration : Read: config.php (1.4.0)

---------------------------------------------------------

Main Menu --

1. Organization Preferences

2. Server Settings

3. Folder Defaults

4. General Options

5. Themes

6. Address Books

7. Message of the Day (MOTD)

8. Plugins

9. Database

10. Languages

D. Set pre-defined settings for specific IMAP servers

C   Turn color on

S   Save data

Q   Quit

Command >> <-- D

SquirrelMail Configuration : Read: config.php

---------------------------------------------------------

While we have been building SquirrelMail, we have discovered some

preferences that work better with some servers that don't work so

well with others. If you select your IMAP server, this option will

set some pre-defined settings for that server.

Please note that you will still need to go through and make sure

everything is correct. This does not change everything. There are

only a few settings that this will change.

Please select your IMAP server:

     bincimap   = Binc IMAP server

     courier     = Courier IMAP server

     cyrus       = Cyrus IMAP server

     dovecot     = Dovecot Secure IMAP server

     exchange   = Microsoft Exchange IMAP server

     hmailserver = hMailServer

     macosx     = Mac OS X Mailserver

     mercury32   = Mercury/32

     uw         = University of Washington's IMAP server

     gmail       = IMAP access to Google mail (Gmail) accounts

     quit       = Do not change anything

Command >> <-- dovecot

SquirrelMail Configuration : Read: config.php

---------------------------------------------------------

While we have been building SquirrelMail, we have discovered some

preferences that work better with some servers that don't work so

well with others. If you select your IMAP server, this option will

set some pre-defined settings for that server.

Please note that you will still need to go through and make sure

everything is correct. This does not change everything. There are

only a few settings that this will change.

Please select your IMAP server:

     bincimap   = Binc IMAP server

     courier     = Courier IMAP server

     cyrus       = Cyrus IMAP server

     dovecot     = Dovecot Secure IMAP server

     exchange   = Microsoft Exchange IMAP server

     hmailserver = hMailServer

     macosx     = Mac OS X Mailserver

     mercury32   = Mercury/32

     uw         = University of Washington's IMAP server

     gmail       = IMAP access to Google mail (Gmail) accounts

     quit       = Do not change anything

Command >> dovecot

               imap_server_type = dovecot

         default_folder_prefix = <none>

                   trash_folder = Trash

                  sent_folder = Sent

                   draft_folder = Drafts

             show_prefix_option = false

           default_sub_of_inbox = false

show_contain_subfolders_option = false

             optional_delimiter = detect

                 delete_folder = false

Press any key to continue... <-- press a key

SquirrelMail Configuration : Read: config.php (1.4.0)

---------------------------------------------------------

Main Menu --

1. Organization Preferences

2. Server Settings

3. Folder Defaults

4. General Options

5. Themes

6. Address Books

7. Message of the Day (MOTD)

8. Plugins

9. Database

10. Languages

D. Set pre-defined settings for specific IMAP servers

C   Turn color on

S   Save data

Q   Quit

Command >> <-- S

SquirrelMail Configuration : Read: config.php (1.4.0)

---------------------------------------------------------

Main Menu --

1. Organization Preferences

2. Server Settings

3. Folder Defaults

4. General Options

5. Themes

6. Address Books

7. Message of the Day (MOTD)

8. Plugins

9. Database

10. Languages

D. Set pre-defined settings for specific IMAP servers

C   Turn color on

S   Save data

Q   Quit

Command >> <-- Q

Сделаем там что бы наша белка могла запускаться со всех хостов, сделаем пару линков:

cd /etc/apache2/conf.d/

ln -s ../../squirrelmail/apache.conf squirrelmail.conf

/etc/init.d/apache2 reload

Отредактирем /etc/apache2/conf.d/squirrelmail.conf...

nano /etc/apache2/conf.d/squirrelmail.conf

... и найдем строку

<Directory /usr/share/squirrelmail></Directory>

Добавим в контейнер

<Directory /usr/share/squirrelmail>

Options FollowSymLinks

<IfModule mod_php5.c>

   AddType application/x-httpd-php .php

   php_flag magic_quotes_gpc Off

   php_flag track_vars On

   php_admin_flag allow_url_fopen Off

   php_value include_path .

   php_admin_value upload_tmp_dir /var/lib/squirrelmail/tmp

   php_admin_value open_basedir

/usr/share/squirrelmail:/etc/squirrelmail:/var/lib/squirrelmail:/etc/hostname:/etc/mailname # пишется все в одну строку

   php_flag register_globals off

</IfModule>

<IfModule mod_dir.c>

   DirectoryIndex index.php

</IfModule>

# access to configtest is limited by default to prevent information leak

<Files configtest.php>

   order deny,allow

   deny from all

   allow from 127.0.0.1

</Files>

</Directory>

[...]

Создадимдиректорию /var/lib/squirrelmail/tmp...

mkdir /var/lib/squirrelmail/tmp

... and make it owned by the user www-data:

chown www-data /var/lib/squirrelmail/tmp

Reload Apache again:

/etc/init.d/apache2 reload

Пробуем перейти по ссылку:

http://192.168.0.100/squirrelmail

http://www.example.com/squirrelmail

Что бы ссылка белки отрывалась по другому адресу добавим в конфиг /etc/apache2/conf.d/squirrelmail.conf...

nano /etc/apache2/conf.d/squirrelmail.conf

Alias /squirrelmail /usr/share/squirrelmail

Alias /webmail /usr/share/squirrelmail

[...]

Перезапустим Apache:

/etc/init.d/apache2 reload

Пробуем зайти на ссылки:

http://192.168.0.100/webmail

http://www.example.com/webmail

http://server1.example.com:8080/webmail

37

Если вы хотите что бы ссылка белки отрывалась по другим ссылкам добавим в конфиг следующее, раскоментируем 4 строки и пропишем что нам надо

nano /etc/apache2/conf.d/squirrelmail.conf

[...]

<NanortualHost 1.2.3.4:80>

DocumentRoot /usr/share/squirrelmail

ServerName webmail.example.com

</NanortualHost>

ПерезапустимApache...

/etc/init.d/apache2 reload

... Пробуем http://webmail.example.com

Установка панели ISPConfig 3

cd /tmp

wget http://www.ispconfig.org/downloads/ISPConfig-3-stable.tar.gz

tar xfz ISPConfig-3-stable.tar.gz

cd ispconfig3_install/install/

Запустим установщик

php -q install.php

root@server1:/tmp/ispconfig3_install/install# php -q install.php

PHP Deprecated: Comments starting with '#' are deprecated in /etc/php5/cli/conf.d/ming.ini on line 1 in Unknown on line 0

--------------------------------------------------------------------------------

>> Initial configuration

Operating System: Debian or compatible, unknown version.

     Following will be a few questions for primary configuration so be careful.

     Default values are in [brackets] and can be accepted with <ENTER>.

     Tap in "quit" (without the quotes) to stop the installer.

Select language (en,de) [en]: <-- ENTER

Installation mode (standard,expert) [standard]: <-- ENTER

Full qualified hostname (FQDN) of the server, eg server1.domain.tld [server1.example.com]: <-- ENTER

MySQL server hostname [localhost]: <-- ENTER

MySQL root username [root]: <-- ENTER

MySQL root password []: <-- yourrootsqlpassword

MySQL database to create [dbispconfig]: <-- ENTER

MySQL charset [utf8]: <-- ENTER

Generating a 4096 bit RSA private key

.............................................................++

.........................................................................................................................++

writing new private key to 'smtpd.key'

-----

You are about to be asked to enter information that will be incorporated

into your certificate request.

What you are about to enter is what is called a Distinguished Name or a DN.

There are quite a few fields but you can leave some blank

For some fields there will be a default value,

If you enter '.', the field will be left blank.

-----

Country Name (2 letter code) [AU]: <-- ENTER

State or Pronanonce Name (full name) [Some-State]: <-- ENTER

Locality Name (eg, city) []: <-- ENTER

Organization Name (eg, company) [Internet Widgits Pty Ltd]: <-- ENTER

Organizational Unit Name (eg, section) []: <-- ENTER

Common Name (e.g. server FQDN or YOUR name) []: <-- ENTER

Email Address []: <-- ENTER

Configuring Jailkit

Configuring Dovecot

Configuring Spamassassin

Configuring Amananosd

Configuring Getmail

Configuring Pureftpd

Configuring BIND

Configuring Apache

Configuring Vlogger

Configuring Apps vhost

Configuring Bastille Firewall

Configuring Fail2ban

Installing ISPConfig

ISPConfig Port [8080]: <-- ENTER

Do you want a secure (SSL) connection to the ISPConfig web interface (y,n) [y]: <-- ENTER

38

39

Generating RSA private key, 4096 bit long modulus

.................................................................................................++

........++

e is 65537 (0x10001)

You are about to be asked to enter information that will be incorporated

into your certificate request.

What you are about to enter is what is called a Distinguished Name or a DN.

There are quite a few fields but you can leave some blank

For some fields there will be a default value,

If you enter '.', the field will be left blank.

-----

Country Name (2 letter code) [AU]: <-- ENTER

State or Pronanonce Name (full name) [Some-State]: <-- ENTER

Locality Name (eg, city) []: <-- ENTER

Organization Name (eg, company) [Internet Widgits Pty Ltd]: <-- ENTER

Organizational Unit Name (eg, section) []: <-- ENTER

Common Name (e.g. server FQDN or YOUR name) []: <-- ENTER

Email Address []: <-- ENTER

Please enter the following 'extra' attributes

to be sent with your certificate request

A challenge password []: <-- ENTER

An optional company name []: <-- ENTER

writing RSA key

Configuring DBServer

Installing ISPConfig crontab

no crontab for root

no crontab for getmail

Restarting sernanoces ...

Stopping MySQL database server: mysqld.

Starting MySQL database server: mysqld ..

Checking for tables which need an upgrade, are corrupt or were

not closed cleanly..

Stopping Postfix Mail Transport Agent: postfix.

Starting Postfix Mail Transport Agent: postfix.

Stopping amananosd: amananosd-new.

Starting amananosd: amananosd-new.

Stopping ClamAV daemon: clamd.

Starting ClamAV daemon: clamd .

Restarting IMAP/POP3 mail server: dovecot.

[Tue May 07 02:36:22 2013] [warn] NameNanortualHost *:443 has no NanortualHosts

[Tue May 07 02:36:22 2013] [warn] NameNanortualHost *:80 has no NanortualHosts

[Tue May 07 02:36:23 2013] [warn] NameNanortualHost *:443 has no NanortualHosts

[Tue May 07 02:36:23 2013] [warn] NameNanortualHost *:80 has no NanortualHosts

Restarting web server: apache2 ... waiting .

Restarting ftp server: Running: /usr/sbin/pure-ftpd-mysql-nanortualchroot -l mysql:/etc/pure-ftpd/db/mysql.conf -l pam -H -O clf:/var/log/pure-ftpd/transfer.log -Y 1 -D -u 1000 -A -E -b -8 UTF-8 -B

Установка завершена.

Комментарии   

0 #5 Android 05.03.2015 06:35
vk.com/id71091935 напишите мне в вк, так легче будет общаться)
Цитировать | Сообщить модератору
0 #4 Super User 04.03.2015 15:53
Хорошо, завтра жду
Цитировать | Сообщить модератору
+1 #3 Android 04.03.2015 15:34
Здравствуйте, приятно что ответили, хотелось бы перенести наш диалог на завтра так как все это делаю на работе, а рабочий день уже закончился, надеюсь завтра вы поможете мне, я отпишусь ближе к обеду, что бы вам было понятнее у меня сейчас 18 часов, завтра примерно в 12 напишу, а то беда, совсем не понимаю что я делаю не так)
Цитировать | Сообщить модератору
0 #2 Super User 04.03.2015 15:23
Прошу прощения, что долго молчал.
Пришлите лог apache2
Цитировать | Сообщить модератору
0 #1 Android 04.03.2015 09:00
В общем мне так и не удалось зайти на IPSConfig, не понимаю в чем дело, на ссылку белки я зашел, но не хз какой name/pass, в общем апаче тоже отказывается работать, что то в конфиге не так, куча ошибок, хотя шел по мануалу, все должно работать, но как то не удалось, в чем ошибка не понимаю, ставил на Debian 7.8, отпишись, помощь нужна)))
Цитировать | Сообщить модератору

Добавить комментарий


Защитный код
Обновить